| Description |
High
tack 2 mil clear polyester film with high tensile, tear and
impact strength. It is inert in water, moisture/ vapor resistant.
Material is unaffected by oils, greases and volatile aromatics. |
| Application |
Applied
to honeycomb core material on one side to hold core material
in place on vacuum table while being milled or machined.
Temperature range - 80°F. to 150°F.
PROTEX
223-2 is used where less protection than PROTEX 223-5 is
required.
Liner
allows the product to be die-cut if desired. |
Typical
Properties:
Backing |
Thickness,
mils 2
Elongation, % M.D. 60-110
Tensile strength, PSI/mil 30,000
Tear, grams/mils 15 |
Typical
Properties:
Adhesive |
synthetic
Base elastomer/resin
Adhesion to steel, lbs/inch width 8-12 lbs (At time of manufacture)
PSTC-1 (Modified) |
Typical
Properties:
Liner |
flatback |
| Standard
Sizes Available |
48"
x 60 yds |
