Surface
protection of metals. Especially well suited for polished
aluminum. Performs well during stretch forming, drilling,
routing and shearing operations. Protects through heat aging
and degreasing through clean line or alodining process.
Allows maximum abrasion resistance during in-house processing,
storage and transportation. Used on aircraft skins in metal
fabricating operations.
The
chemical and heat resistance of the polyester film is one
of the reasons why it is chosen over some other films available.
The adhesive was designed to withstand the pressure and
heat (Typical: 2 hours at 350°F. and 72 hours at 275°F.,
and autoclave pressure and heat, 2 hours at 350°F. with
35 PSI) with no residue or transfer of adhesive.
PROTEX
8216-2 can remain on various metals during such operations
as vapor degreasing and solvent cleaning with MEK, Trichloroethylene,
Toluene, De-natured Alcohol and IPA, with no adverse effect
to polyester film or adhesive. |
