Description
Protex® 20S
Description
20 mil latex impregnated paper. For applications where extra protection and high tack is required.
Application Surface
Pre-Mask
Substrate
Paper
Thickness
20 MIL (paper)
Application
Wing walk areas to eliminate damage from foot traffic, top areas of aircraft and on leading edges. Used for Tedlar ® interior protection in ceiling areas, overhead storage compartments and for exterior skin protection where heavy duty protection is required. Used to protect graphite composite surfaces from impact damage that could result in interlayer fracturing. PROTEX 20S may also be used for movie studio backdrops, cover-ups, and painting of sets. It can withstand 60 pounds of sandblasting pressure for decorative applications, i.e. glass etching and light blasting on wood.
Liner allows the product to be die-cut if desired.
Surface Sensitivity
Yes
Adhesion Level
HIGH
Heat Tolerance
No heat applied, 100° – 150°
Typical Properties – Backing
Basis wt., lbs/3000 sq. ft. 175-187
Thickness, mils 19-23
Tensile strength, lbs/inch M.D. 25 min
Elongation, % M.D. 10 min
Elmendorf tear, grams, M.D. 280 min
C.D. 360 min
Typical Properties – Adhesive
Base Natural latex
Adhesion to steel, oz/inch width 44-50 (At time of manufacture)
PSTC-1 (Modified)
Typical Properties – Liner
flatback
Standard Sizes Available
36″ x 30 yds