skip to Main Content
1 (626) 359-3261 1 (626) 359-7160

Protex® 20VS

Description

Protex® 20VS

Additional Info

Description
20 mil latex saturated paper.

Application Surface

Metals, Plastics, Glass, Painted Surfaces
Substrate
Paper

Thickness

20 MIL (paper)

Application

Used to protect acrylic windows, canopies and windshields, as well as bare metals, glossy, polished and painted surfaces. The paper is vinyl coated on one side and will withstand more abrasion than comparable papers. PROTEX® 20VS has been manufactured to meet rigid specifications of the aircraft industry.

One of the advantages to the PROTEX® 20VS adhesive system is that if the adhesive-coated side of the paper comes into contact with itself (e.g. if the paper is folded), the product will not block. The two surfaces can be pulled apart without the adhesive being pulled off the paper backing on either side. This will prevent having to dispose of any unusable product.

Self wound with lower tack level than 20V.

DO NOT USE ON COPPER, BRASS, OR ANODIZED ALUMINUM, OUTDOOR EXPOSURE IS NOT RECOMMENDED.

Surface Sensitivity

Yes

Adhesion Level

LOW

Heat Tolerance

No heat applied, 100° – 150°

Typical Properties – Backing

Backing Basis wt., lbs/3000 sq. ft. 175-187
Thickness, mils 19-23
Tensile strength, lbs/inch M.D. 24.2 min
Elongation, % M.D. 3.0 min
Elmendorf tear, grams, M.D. 229 min

Typical Properties – Adhesive

Base Acrylic Latex
Adhesion to steel, oz/inch width 25-35 (-5/+7) (At time of manufacture)
PSTC-1 (Modified)

Typical Properties – Liner

none

Typical Properties – Storage

Shelf life 6 months if stored in a cool dry place, out of direct sunlight.

Standard Sizes Available

36″ x 60 yds, 48″ x 60 yds

Protex® 20VS – Product Information Sheet (PDF)

Back To Top