PROTEX 8216-2LC
Protex 8216-2LC is a 2 mil polyester film with a low tack acrylic latex adhesive, and a release liner for the purposes of converting or pre-cutting. Its transparent, UV resistant properties make it ideal for protecting surfaces where light transmission during any process is preferred. The durable polyester provides superior protection from damage caused by abrasive and low impact conditions. PROTEX 8216-2LC is capable of withstanding temperatures up to 325 degrees and prolonged outdoor exposure. Chemical resistance recommended only after thorough initial testing.
*This product is not intended for fly-away applications. Test prior to use on copper, brass or anodized aluminum or before outdoor exposure.
BACKING
Thickness, mils 2
Tensile strength, PSI/mil 30,000
Elongation at break % 106
Elmendorf Tear, grams 15
ADHESIVE
Base Acrylic
Adhesion to steel, oz./in. width 1 - 3 (-0.2/+0.6)
(At time of manufacture)PSTC-1 (Modified) Silicone Free
LINER
Flat
STORAGE
Shelf life is 1 year if stored in a cool dry place, out of direct sunlight.
TEST RESULTS
SOLVENT RESISTANCE:
-
1,1,1, Trichloroethane Degrease - 1 hr. @ 140 degrees F. - No transfer, slight edge penetration.
-
Excellent resistance to: Toluene, MPK, Alcohols, Trichloroethylene.
HEAT RESISTANCE:
-
Acrylic & Aluminum
1 yr. outdoor and 150 degrees F.
200 hr. Atlas weatherometer -
Clad Aluminum
96 hrs. @ 290 degrees F. 1 yr.
@ 150 degrees F. -
Polished Aluminum
1 yr. @ 150 degrees F -
Autoclave
2 x 1 hr. @ 350 degrees F. and 35 psi
-
ROLL SIZES
48” x 100 yds